We are pleased to offer the finest 0% billet AR-15 lower receivers in the world. What is a zero percent lower you ask? As the name suggests, it's a lower receiver that is zero percent complete. In other words, solid aluminum bricks. Our lowers start off in the form of these billet aluminum blocks and are machined to 80% completion on our state-of-the…
AR15 Rifle build kit includes parts necessary to complete your 80 percent AR15 lower [not included]. 16” 5.56 carbine gas upper features MLok 13.5” handguard and includes charging-handle, bolt carrier group, lower parts kit, and Magpul stock. Not for sale in New York or New Jersey.
AR15 Rifle build kit includes parts necessary to complete your 80 percent AR15 lower [not included]. Chrome Moly steel barrel chambered in 5.56 NATO with a 1:7 twist rate, M4 barrel extension, and a Mid-Length gas system. The barrel is finished off with a standard handguard, F-Marked gas sight base, and A2 flash hider.
16″ 4150V Chrome Moly Vanadium steel barrel, chambered in 5.56 NATO, with a 1:7 twist, M4 barrel extension, and a Mid-length gas system. The barrel is finished with a .750″ diameter low-profile gas block, 13.5″ Lightweight M-Lok Free Float Rail and an A2 flash hider. Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring M4 feed…
AR15 Rifle build kit includes parts necessary to complete your 80 percent AR15 lower [not included]. 16” M4 5.56 carbine-length gas upper features Magpul MOE FDE Handgaurds and includes charging-handle, bolt carrier group, lower parts kit, and Magpul stock. *Not for sale to residents of the states of New York or New Jersey.
AR15 Rifle build kit includes parts necessary to complete your 80 percent AR15 lower [not included]. 16” Classic M4 5.56 carbine-length gas upper features ODG Handguards and includes charging-handle, bolt carrier group, lower parts kit, and ODG stock.
AR15 Rifle build kit includes parts necessary to complete your 80 percent AR15 lower [not included]. 16” M4 5.56 carbine-length gas upper features Magpul MOE Black Handgaurds and includes charging-handle, bolt carrier group, lower parts kit, and Magpul stock.
AR15 Rifle build kit includes parts necessary to complete your 80 percent AR15 lower [not included]. 16″ Midlength build kit features 13.5″ MLOK handguard, MOE stock, grip and MBUS.
THE GLOCK OWNERS ESSENTIAL TOOL Easily remove pins to disassemble your Glock to clean, modify or maintain. Precision-knurled driver to easily install or remove stock and aftermarket front sight. *DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Complete AR-308 Upper Receiver in .308WIN. Features an 20” stainless steel barrel, a 1:10 twist rate, and 5 position adjustable gas block. Includes bolt carrier group and charging handle. Lower parts kit, 80% Lower, and sights not included.
This tooling package is for frames that need the barrel seat cut. Generally, frames that need the barrel seat cut don’t need decking. Check with the company that you buy the frame from as to what operations are needed to complete the frame.
The 22LR Collection USB features the most popular and widely used 22LR 3D printable guns available on DEFCAD. The following models are 3D printable and chambered for the 22LR cartridge. Available to US persons except New Jersey residents. Does not ship internationally. USB includes the following: AR22 Lower 22LR Liberator Fosscad .22 Semi Automatic Pistol
$135.99Original price was: $135.99.$89.95Current price is: $89.95.
These newly designed WBP Polish synthetic 7.62×39 30rd magazines are a great option for a light weight reliable mag. Throw them from extreme heights or run them over repetitively with a 2 1/2 ton Deuce on concrete and they are still in the fight. Pack of 5 magazines.
As we continue to ship lowers in accordance with the ATF rule, we are faced with a backlog of 3-4 weeks due to high demand. Rest Assured, we are shipping all orders in the sequence that they are received in as fast as we can.
GUNSMITHING PIN PUNCH SET WITH PIN ALIGNMENT TOOL COMPLETE SET OF STANDARD SIZED GUN PIN PUNCHES. PIN ALIGNMENT TOOL HOLDS EVEN THE SMALLEST PINS PRECISELY. DURABLE CASE WITH POLYCARBONATE LID. This advanced kit works to safely to remove and install gun pins. The ergonomic and perfectly balanced hammer partners with easy grip hex-handle punches for precise control. Our proprietary pin…
Circle 7 Armory Reinforced Fire Control Group Axis Pin Retainer Plate – Made in the USA of 304 Stainless for maximum corrosion resistance. – Thickest plate design possible to control axis pin side play. – Reinforced profile to resist installation damage. -
Made in USA AK-47 Starter Kit includes all fixtures and tooling you need to complete an AK-47 80% lower receiver in the Ghost Gunner 3 CNC mill. For GG3 use only. Includes the following items: Tools: (1) 1/8” mm Hex Wrench, (1) 3mm Hex Wrench, (1) 2.5mm Hex Wrench Tooling: (1) 1/8” ER-11 Collet, (1) 1/8” Carbide End Mill Nuts,…
This black poly AK47 7.62×39 build kit comes fully headspaced with new Vanadium Nitride Barrel, 80% lower receiver sold separately. Full Auto Components [springs/pins/sear/rate reducer] are not included.
AKM 47 Rivet Set includes all necessary rivets to complete our AKM 47 7.62 fixed stock parts kit. Features long rear trunnion rivet with shorter head and proper swell neck rivets for front trunnion installation.
The ALG AK Trigger Enhanced with Lightning Bow (AKT–EL) is a single stage trigger designed for the AK47 and AK74 variant platforms. The AKT–EL features a smoother and shorter trigger pull than the stock trigger and is ideal for combat and home defense use.
A.P.I. Gun and Ammo Bags utilize a combination of Vapor Corrosion Inhibitor (VCI) chemistry and carefully chosen barrier packaging materials to completely prevent the corrosion of firearms, firearm parts, and ammunition during storage. -
A.P.I. Gun and Ammo Bags utilize a combination of Vapor Corrosion Inhibitor (VCI) chemistry and carefully chosen barrier packaging materials to completely prevent the corrosion of firearms, firearm parts, and ammunition during storage.
A.P.I. Gun Bags utilize a combination of Vapor Corrosion Inhibitor (VCI) chemistry and carefully chosen barrier packaging materials to completely prevent the corrosion of firearms, firearm parts, and ammunition during storage.
A.P.I. Gun Bags utilize a combination of Vapor Corrosion Inhibitor (VCI) chemistry and carefully chosen barrier packaging materials to completely prevent the corrosion of firearms, firearm parts, and ammunition during storage.
CMMG AR-style .22LR 10 round magazine. For use in standard AR-15 lower receivers using the CMMG .22LR bolt. *Not compatible with Smith and Wesson M&P15-22 rifles.
CMMG AR-style .22LR 25 round magazine. For use in standard AR-15 lower receivers using the CMMG .22LR bolt. *Not compatible with Smith and Wesson M&P15-22 rifles.
Single Stage match grade trigger for AR15 patterned rifles, drop-in pack comes with flat face trigger and breaks at ~3.5lbs. Significant improvement over factory mil-spec triggers the crisp trigger pull and short rest offers shooters more accurate Features: Anti-Walk Pin Set included 3.5 lbs. Smooth, Crisp trigger pull with a short reset Full Power Hammer Spring Custom Flat Trigger Bow…
Standard single-stage government-style fire control group. This finely polished super slick nickel coated hammer and trigger is substantially smoother than mil-spec. A great economical upgrade.
6061 billet aluminum AR-15 non receiver. This is for use with the Zero Percent Starter Kit on the Ghost Gunner 3, and results in a completed “upper lower” for the AR-15 platform. *Please allow up to 12-16 weeks for delivery
R15 Rifle build kit includes parts necessary to complete the U-Bolt Vanguard 3D Printable AR15 Lower Receiver by Ivan the Troll. AR15 16” 5.56 carbine gas upper features MLok 13.5” handguard and includes charging-handle, bolt carrier group, lower parts kit, Magpul stock, and USB drive with printable file. *As this product is under our 3D printing section, some part(s) must be 3D printed…
ALL THE TOOLS NEEDED TO BUILD OR CUSTOMIZE AN AR15 This kit of Master Grade Tools and how-to information equips you to confidently tackle everything from building your own gun from the ground up to customizing or modifying an existing gun. With better tolerances, materials and expanded capability, every tool is carefully designed to make each job as simple and…
The AR15 Collection USB features the most popular and widely used AR15 3D printable models available on DEFCAD. The following models are 3D printable and take standard AR15 parts. Does not ship to NJ, WA, or internationally. USB includes the following: AR15000 Printable Lower U-Bolt Vanguard AR-15 80% Milling Jig Support Creators directly or get access files at DEFCAD.com Please allow 2-3 weeks…
A high quality lower parts kit needed to assemble your AR-15 lower. Parts are made in USA! Assembly takes place right here at our new facility in Columbia, SC. Features black oxide coated hammer and trigger springs.
These improved pins are slightly longer to make take down much faster and easier. The ends have a divot to allow the use of a bullet tip without the fear of slipping. Used on the Mk3 platform that is based on the LR308 patterned .308 rifle.
Looking for replacement parts for your AR-9 lowers? Look no further. This Kit has everything you need to help you get started on assembling your AR-9 Lower.
Invader Zip presents: The ARK – a 3D printed Pistol Caliber alien tech at the forefront of discovery. Compatible with: 9mm, 10mm, .40S&W, .45ACP & .22LR *As this product is under our 3D printing section, some part(s) must be 3D printed by the end user to complete this build* *accepts Glock magazines
nvader Zip presents: The ARK – a 3D printed Pistol Caliber alien tech at the forefront of discovery. Compatible with: 9mm, 10mm, .40S&W, .45ACP & .22LR *As this product is under our 3D printing section, some part(s) must be 3D printed by the end user to complete this build* *accepts Glock magazines
Invader Zip presents: The ARK – a 3D printed Pistol Caliber alien tech at the forefront of discovery. Compatible with: 9mm, 10mm, .40S&W, .45ACP & .22LR *As this product is under our 3D printing section, some part(s) must be 3D printed by the end user to complete this build* *accepts Glock magazines
Invader Zip presents: The ARK – a 3D printed Pistol Caliber alien tech at the forefront of discovery. Compatible with: 9mm, 10mm, .40S&W, .45ACP & .22LR *As this product is under our 3D printing section, some part(s) must be 3D printed by the end user to complete this build* *accepts Glock magazines
Designed, manufactured, and assembled by Riptide Rails, the non-reciprocating Riptide Charging Handle is an upgrade to the DIY and printed charging handles for Invader Zip’s Ark! Mil Spec MIL-A-8625 Type II anodize (black) finish. While the Riptide Charging Handle was designed for the Ark, there are other weapon systems that will be designed to use it as well.
Aves Rails is proud to bring you the next great development for 3D printable frames. With the help of one of our favorite developers (nguyenkvvn) we are presenting the DD43.1 frame and rail system. The front rails are made from the same precision machined 6061 aluminum while the rear rails are laser cut and formed to exact specifications from 316…
These rails are laser cut and bent on an industrial press brake ensuring the highest quality achievable. Designed and tested in collaboration with Deterrence Dispensed to ensure the perfect fit in your frame. These rear rails are the same as what is offered in the FMDA DD17.2, DD19.2 and DD26.2 rail kits. Because the front rail from a version 1 G17 and G19 kit…
Aves Rails is pleased to offer the first commercially available rail kit for the next generation of printed Glock style frame. The FMDA DD17.2 is the most versatile and strongest design available today. The front rails for this kit are the same high quality and high tolerance rails that are offered in the original FMDA G17 rail kit. The rear…
The FMDA DD19.2 builds on the foundation that was established with the DD17.2. This brings you the ease of assembly, strength and versatility to a more compact frame. The front rails for this kit are the same high quality and high tolerance rails that are offered in the original FMDA G19 rail kit. The rear rails are an all new…
The FMDA DD26.2 brings the ease of assembly and durability of the DD17.2 and DD19.2 to an even more compact frame. The front rails for this kit are a completely new design to the DD26.2. Designed by Deterrence Dispensed and initially prototyped by Aves Rails, we are proud to have participated in their development. The rear rails are an all new design…
The Beretta 92 FS semi-automatic pistol operates on a short recoil, delayed blowback system, leading to faster cycle times, exceptional accuracy, and greater reliability. The chrome-lined barrel provides extreme corrosion resistance, while the deeply-recessed combat muzzle crown protects the rifling
Complete your favorite Glock 19 9mm frame with this awesome Blue Camo cerakote complete slide. Whether you’re finishing your Polymer80 PF940c Frame, or just wanna add a new look to your existing Glock 19 frame, this upper is a great way to go! Durable, reliable, and easy on the eyes. -
Bolt Catch Screw and Allen Wrench Key (hex key) One of the reasons we chose the DPMS Generation 1 pattern for our AR15, AR9, and AR-308 platform is for the ease in which you can install and change your bolt catch. Gone are the days of having to punch in and out a small roll pin, with the set screw…
WORLD’S EASIEST BORE CLEANER The single piece Dual Action Cable with integrated phosphor bronze brush and braided mop wraps around the unique Flex-Case Handle to keep the system stowed and organized. To use, simply flip, feed, clip, and pull. Throw it in your pack, or put it in your pocket. It’s the next best thing to a self-cleaning gun.
Brownells BRN-180™ Complete Upper Receiver is inspired by the Armalite® AR-180 of the 1960s. Developed as a successor to the original AR-15, the AR-180 was a civilianized version of the AR-18, itself an upgrade on the M16 platform. The BRN-180 incorporates many of the AR-18/AR-180 improvements – including its robust and reliable gas piston operating system. (Yes, the originators of…
One great looking target pistol. One great shooter. With a specially contoured barrel, this Buckmark has style to match its amazing accuracy. The full-length scope base will allow you to mount just about any reflex, red-dot, prismatic, or magnified optic you want.
One great looking target pistol. With a specially contoured barrel, this Buckmark has style to match its amazing accuracy. The full-length scope base will allow you to mount just about any reflex, red-dot, prismatic, or magnified optic you want
The high end of the Buck Mark line. The Buck Mark Plus UDX stand apart from the rest of the Buck Mark pistol line, focusing not just on accuracy and function, but accentuating the look and feel, giving you a premium semi auto 22 pistol. The grip frame is machined with finger Slab side barrel has highly polished flats for…
he Canik TP9 Elite Subcompact comes packed with features right out of the box. Included are interchangeable backstraps in 2 sizes, a reversible magazine release, a 12 round and 15 round magazine, a co-witnessed micro red-dot interface, and an integral picatinny rail. Make this your concealed carry handgun today at the best price online from gunsretailer
Century Arms’ Canik TP9SFX is an award-winning, military-grade 9-mm pistol. It features standard dovetail sights with a red and green fiber-optic front sight and a single-action trigger. Its rear sight is installed in a removable red dot cover to eliminate interference with certain red dot sights. The pistol features a match-grade barrel, loaded chamber indicator, and reversible ambidextrous cocking lever.
CMC’s innovative, self-contained and easy-to-install AR-15 trigger groups have been completely re-tooled to maximize production capacities, incorporate new design enhancements and reduce cost. CMC’s AR-15 trigger groups have always yielded exceptional trigger pull dynamics for thousands of satisfied customers.
CMC’s innovative, self-contained and easy-to-install AR-15 trigger groups have been completely re-tooled to maximize production capacities, incorporate new design enhancements and reduce cost. CMC’s AR-15 trigger groups have always yielded exceptional trigger pull dynamics for thousands of satisfied customers.
Barrel and Bolt Group Kit, 4.5″ MT 4140CM, 22LR Everything you need to convert your existing upper to a dedicated .22LR. Just purchase a magazine and you are ready to go. For best performance use a round style hammer as notched hammers can cause function issues and 36 grain plated nose bullets have proven to be the best choice for…
Ready to complete your AR10/LR-308 lower receiver? The CMMG® ZEROED™ AR10 (Mk3/.308WIN) lower parts kit is just the thing you need. All parts are made in the USA and comes in convenient color-coded packets to make assembly and part identification a breeze. Check out our interactive install walkthrough video below or read the CMMG Resources LPK Install article for an…
4 mm collet ER-11 used to secure 5/32″ drill. For use with Ghost Gunner AR-15, AR-308, and M1911 milling programs. *Please allow up to 3 weeks for delivery.
Sig Sauer P320 X-Five 9mm 21 Round extended magazine with coyote tan baseplate. The Coyote Tan base matches the P320-M17 color. Made from durable steel with steel internal springs and features a special anti-friction coating. Engineered to meet strict military specifications for performance and reliability.
Creality CR Touch, Which is specifically designed for 3D printer Auto bed leveling sensor by CREALITY Company. 【Easy Installation】First, choose the appropriate mounting bracket according to your printer, and install this CR Touch auto-leveling kit to your 3D printer. Download the CR Touch program from the Crealtiy official website and copy it to the TF/SD card. Insert it directly into…
Ender 3 S1 Pro by Creality with 220 x 220 x 250 print volume, removable magnetic bed plate, and easy assembly (+/- 15 minutes). The heated bed warms up quickly and is compatible with all branded filaments. Thanks to the resume function, you can continue printing after, for example, power-loss. Popular software like Slic3r, Cura and Simplify 3D will work…
Ender 3 V2 by Creality with 220 x 220 x 250 print volume, removable bed plate, and easy assembly (+/- 30 minutes). The heated bed warms up quickly and is compatible with all branded filaments. Thanks to the resume function, you can continue printing after, for example, power-loss. Popular software like Slic3r, Cura and Simplify 3D will work with this…
Enhanced Fire control group for AK/RPK based rifles, for stamped receiver. Includes single-hook trigger, hammer, disconnector, disconnector springs. Proudly made in the USA by FIME Group, LLC.
This EPT upgrades the standard combat-style fire control group with a single-stage, target style, fire control group with polished contact surfaces and a electroless nickel coating.
Enhanced Polished Trigger MOE Lower Build Kit EPT Lower Build Kit includes an enhanced polished trigger assembly, Mil-Spec MOE Stock, Magpul MOE pistol grip, lower parts kit, Mil-Spec buffer tube assembly, and trigger guard. This EPT Lower Build Kit upgrades the standard combat-style fire control group with a single-stage, target style, fire control group with polished contact surfaces and a…
This ETS magazine features extreme impact resistance" creep resistant feed lips and a translucent body that allows you to see your ammo count and type. It is compatible with Glock and aftermarket floorplates.
Genuine Factory Glock 15 round magazine for Glock 20 in 10mm. These will fit your AR pistol dedicated build if you build using the 10MM complete pistol upper as well as your Polymer80 PF45 frame.
Everything you need to complete your FGC-9 – Includes G19 barrel, pre-drilled and welded bolt, and aluminum ejector. The FGC-9 is a 9x19mm pistol caliber carbine that is made mostly out of 3D-printed components, utilizes an AR-15 fire control group. It is compatible with Glock magazines and offers a truly effective, simple to build and reliable tactical option for self-defense…
Everything you need to complete your FGC-9 – Includes custom machined barrel (threaded), pre-drilled and welded bolt, and aluminum ejector. The FGC-9 is a 9x19mm pistol caliber carbine that is made mostly out of 3D-printed components, utilizes an AR-15 fire control group. It is compatible with Glock magazines and offers a truly effective, simple to build and reliable tactical option…
Product Description Our FGC-9 MKII Ejector is machined from 6061 aluminum and is a drop-in replacement for your consumable 3D-printed ejector. Compatibility FGC-9 MKII What’s Included (1) FGC-9 MKII Ejector
While the 3D-printed FGC-9 mag catch works well, over time they will almost certainly become warped and prone to breaking. Riptide Rails FCG-9 Mag Catch is machined from 6061 aluminum and is a direct replacement of your 3D-printed FGC-9 mag catch. Mil Spec MIL-A-8625 Type II anodize (black) finish.
This is a direct replacement for your consumable 3D-printed FGC-9 MKII feed ramp. *There are multiple barrels that can be used with the FGC-9 MKII, and each type requires a different feed ramp. Please ensure you select the correct feed ramp to ensure proper fit and function. This feed ramp is compatible with Glock style barrels, NOT hydraulic tubes. Manufactured by Riptide Rails.
This is a direct replacement for your consumable 3D-printed FGC-9 MKII feed ramp. *There are multiple barrels that can be used with the FGC-9 MKII, and each type requires a different feed ramp. Please ensure you select the correct feed ramp to ensure proper fit and function. This feed ramp is compatible with the STANDARD hydraulic tube barrel type, not Glock barrels. Manufactured…
The Standard Issue was named after the new standards we’ve set in reliability and functionality. The slide alone was developed not only to compete with a basic Glock 19 slide, but to Surpass it. When you need more than the basic, defend yourself with something tested in the field extensively, The Standard Issue 19.
FNX 45 for sale in FDE with cheap shipping. We can’t say HOW cheap we sell the FNx 45, . Buy the FN FNX-45 USG FDE .45ACP 4.0-inch 15Rds FN 66964 from gunsretailer, the cheapest online gun store. We can’t say HOW cheap we sell the FNx, FN part # 66964,
FNX 45 Tactical for sale in FDE with cheap shipping. We can’t say HOW cheap we sell the FNx 45, so click . Buy the FN FNX-45 Tactical Threaded Barrel Flat Dark Earth .45 ACP 5.3-inch 15Rds FN 66968 from gunsretailer, the cheapest online gun store. We can’t say HOW cheap we sell the FNx, FN part # 66968, .…
The Binary Firing System® GEN 3 (BFSIII®) is a 3-position trigger. In position 3 it fires one round on pull and one round on release, making this trigger ideal for both tactical and competition use. The BFSIII® provides greatly reduced split times between rounds, allowing for tighter groups.
The Binary Firing System® GEN 3 (BFSIII®) is a 3-position trigger. In position 3 it fires one round on pull and one round on release, making this trigger ideal for both tactical and competition use. The BFSIII® provides greatly reduced split times between rounds, allowing for tighter groups.
The Binary Firing System® GEN 3 (BFSIII®) is a 3-position trigger. In position 3 it fires one round on pull and one round on release, making this trigger ideal for both tactical and competition use. The BFSIII® provides greatly reduced split times between rounds, allowing for tighter groups.
Real Avid 2-IN-1 TOOL FITS BOTH A1 AND A2 FRONT SIGHTS This smartly designed tool makes front sight adjustments quick and easy. The stainless steel shaft is knurled to create no-slip leverage when turning tight posts. It works on both A1 & A2 front sights and the compact design won’t clutter up your bag.
The dimpled, 416R Stainless Steel, 308 WIN 1/10 twist, mid-length gas system upper is paired with a 15″ M-Lok free-float rail, low profile adjustable click detent 5 position gas block, and an A2-style muzzle device. The gas system is enhanced with a nitrided gas tube in order to better resist high heat and corrosion. This upper receiver is precision machined…
G17 Parts Kit w/Riptide Rails, and USB Drive containing FreeMenDon’tAsk’s G17 DIY Rail Pistol Frame. *Includes locking block DOES NOT COME WITH FRAME *As this product is under our 3D printing section, some part(s) must be 3D printed by the end user to complete this build*
G19 Parts Kit w/Aves Rear Rail and 3D printable USB File. *INCLUDES LOCKING BLOCK DOES NOT COME WITH FRAME or MAGAZINE *As this product is under our 3D printing section, some part(s) must be 3D printed by the end user to complete this build*
SS80 Parts Kit w/3D printable USB File, locking block, and rails. Fits g43X. Includes one 6 round round Glock 43 magazine. *DOES NOT COME WITH FRAME *As this product is under our 3D printing section, some part(s) must be 3D printed by the end user to complete this build*
pare nuts and bolts used to mount an AR-15 80% lower and jig assembly to the Ghost Gunner Contains: 3 M4x45 mm bolts, 2 M4x20 mm bolts, 1 M4x80 mm bolt, 3 M4 nuts, 7 M4 washers, 3 M4 T-slot nuts, and grip bolt (1/4in x 1in). *AR-15 Jig Bolts are included with the purchase of an AR-15 Starter Kit.
This jig has been made specifically for the Ghost Gunner CNC mill. It can be used with our mil-spec AR15 80% lowers to finish them. The jig features injection-molded mounting fixtures for completing 80% AR-15 receivers with the Ghost Gunner 1, 2, or 3 CNC mills. Comes with bolts and washers. Add the tooling kit for everything needed to complete…
AR-15 Starter Kit includes all fixtures and tooling you need to complete an AR-15 80% lower receiver in the Ghost Gunner 1, Ghost Gunner 2, or Ghost Gunner 3 CNC mill. This jig WILL NOT work with any other system. It is ONLY for use in a Ghost Gunner CNC mill and nothing else.
This jig has been made specifically for the Ghost Gunner CNC mills. It can be used with our 308 80% lowers to finish them. The jig features injection-molded mounting fixtures for completing 80% AR-308 receivers with Ghost Gunner 2 or Ghost Gunner 3. Comes with bolts and washers. Add the tooling for everything needed to complete 80% receivers with your…
AR-308 Starter Kit includes all fixtures and tooling you need to complete an AR-308 80% lower receiver in the Ghost Gunner 2 and Ghost Gunner 3 CNC mill. This jig WILL NOT work with any other system. It is ONLY for use in a Ghost Gunner CNC mill and nothing else.
Ghost Gunner 3 allows you to manufacture firearms with confidence and ease, in the privacy of your own home. It is sold with the cut codes for the AR-15, AR-.308, 1911, Polymer80 and AK-47 receivers and frames. GG3 is also compatible with aftermarket jigs and cut codes (including the AR-9 and skeletonization) and engraving software. Learn more here. Please note this…
Custom 1/4″ x 1-1/4″ LOC, 3″ OAL Solid Carbide End Mill. (When used for milling AR pattern 80% lowers, we have seen these maintain precision for between 8 to 10 lowers before needing to be replaced.)
Includes everything you need to get started milling an aluminum 1911 frame in the Ghost Gunner 2 or Ghost Gunner 3 CNC mill. This jig WILL NOT work with any other system. It is ONLY for use in a Ghost Gunner CNC mill and nothing else. Available on backorder
Precision machined delrin fixture for completing Polymer80 brand 80% PF940C Compact polymer frames. Includes all necessary bolts, and tooling. This jig WILL NOT work with any other system. It is ONLY for use in a Ghost Gunner CNC mill and nothing else. * Note: we do not currently ship lowers or jigs to residents of and persons in New Jersey.
Replacement probe block (1) for the Polymer 80 PF940C jig/starter kit. Also can be used for your own home made jig designs and codes. Please note there is a 3 to 4 week lead time on this item.
This includes only the tooling and the collets necessary for use in the Ghost Gunner 2 CNC Machine. Tooling is for use with the AR15 and/or AR308 jigs. You can also purchase it at a discount on the specific jig page. The tooling includes one 1/4″ custom carbide end mill, one 5/32″ HSS drill bit, one 1/4″ collet, and one…
Smith & Wesson M&P Shield 9MM Parts Kit with manual safety. Includes 3D printable file and one 7 round magazine. DOES NOT COME WITH FRAME *As this product is under our 3D printing section, some part(s) must be 3D printed by the end user to complete this build*
Smith & Wesson M&P Shield 9MM Parts Kit w/3D printable file. Comes with one 7 round magazine. DOES NOT COME WITH FRAME *As this product is under our 3D printing section, some part(s) must be 3D printed by the end user to complete this build*
Constructed from precise engineering and Glock legendary craftsmanship this is a Glock 17 you can count on for years to come. Chambered in 9mm, it handles any situation with ease. A 4.49 inch barrel will get you quickly on target, while the grips provide excellent style and control. From training to home protection, or sporting excursion and personal defense, the…
Here it is! everything you need to assemble your Glock 19 frame. This is a complete Glock 19 lower parts kit with upgraded mag release, and slide release. This product is a great way to finish your Polymer80 PF940C frame, or to just restore your factory G19 frame back to its original glory with a few added upgrades.
What's included: -Glock 19 Gen 3 OEM complete frame -OEM trigger assembly -OEM pins -OEM mag catch and spring -OEM slide stop lever/release -OEM slide lock lever and spring -OEM locking block -OEM Glock case
Favored for self-defense and hunting worldwide Dual recoil spring assembly Modular back strap Rough grip texturing Integral accessory rail Drift adjustable rear sight Reversible magazine catch Comes with 3 magazines
avored for self-defense worldwide Dual recoil spring assembly Modular back strap Rough grip texturing Integral accessory rail Drift adjustable rear sight Reversible magazine catch Comes with 3 magazines
Reliability and simplicity have made GLOCK® semi-automatic pistols a favored sidearm for law enforcement, military, and civilian use all over the world. The GLOCK 22 is a full-size service pistol, shooting the .40 S&W pistol cartridge, a standard defense round with proven knock down power.
Slim Frame design Subcompact for concealed carry Tremendous firepower in a semi-auto Safe-Action trigger system Finger grooved non-slip grip Impervious to corrosion White-dot front sight White-bracket rear sight Fieldstrips without tools 2 double stacked magazines
Slim, subcompact for concealed carry Same internal mechanism as larger GLOCKs Dual recoil spring assembly Safe-Action trigger system Rough grip texturing Drift adjustable rear sight Comes with 2 magazines
Single-stacked magazine Slim, compact concealed carry gun Same materials and quality control as all Glock pistols Striker fired, with Safe-Action trigger system White-dot front sight and white-bracket rear sight Great for those already familiar with Glock pistols Comes with 2 ultra-reliable single-stack magazines
This is a high capacity RWB 33 round magazine for all Glock 9mm Pistols. This magazine extends out of the mag well. Polymer mag body, lined with a steel sheath and steel reinforced feed lips with a remaining round count window on the back of the mag.
Favored for law enforcement worldwide Short-recoil operated, striker-fire pistol High-strength polymer frame Steel slide with Tenifer finish Safe-Action trigger system Impervious to corrosion Integral accessory rail White-dot front sight White-bracket rear sight Fieldstrips without tools Comes with 2 magazines
Each GLOCK magazine is constructed from a hardened steel insert encased in high tech polymer to protect the magazine and prevent deformation" even when dropped from a great height. The high quality spring and follower ensure reliable feeding from the first to the last shot.
Each GLOCK magazine is constructed from a hardened steel insert encased in high tech polymer to protect the magazine and prevent deformation" even when dropped from a great height. The high quality spring and follower ensure reliable feeding from the first to the last shot.
Each GLOCK magazine is constructed from a hardened steel insert encased in high tech polymer to protect the magazine and prevent deformation" even when dropped from a great height. The high quality spring and follower ensure reliable feeding from the first to the last shot.
Each GLOCK magazine is constructed from a hardened steel insert encased in high tech polymer to protect the magazine and prevent deformation" even when dropped from a great height. The high quality spring and follower ensure reliable feeding from the first to the last shot.
The classic Henry Repeating Arms Golden Boy Rifle is a staple in any hunters collection! Grab your very own from gunsretailer today for the best price online. This Silver Eagle edition is ornately engraved with Ivory and Silver etchings, so be sure to keep it polished and it will be your favorite gun in no time at all!
Released in November 2019, the original GST-9 took the 80% world by storm, offering modular enhancements to a Glock style frame without losing any parts compatibility. Two years and hundreds of thousands of rounds downrange later, we've raised the bar again with the GST-9 MOD1.
Every GST-9 ships with this included in the same color of the frame, no substitutions. Want to accent your frame with another color? Lose a grip, or want to practice stippling? This is a replacement compact size grip for the GST-9: MOD1 Pistol Frame. This is a standard G19 size that will fit all but the largest shooters hands.
Designed for shooters with larger hands, or who want to utilize Glock 17 magazines and still fit flush in the magwell, the GST-9 Full Size Grip Module will add an extra .41" to your grip. If you are looking for a full-size pistol, want to use full-size mags, or just want to pick up another color to accent your pistol,…
Looking for an even more aggressive grip experience for your GST-9 MOD1? We've got just the thing for you! Introducing the Full Edge from Handle It Grips! The Full Edges are a custom design adhesive grip for the GST-9 MOD1. Users can install the grip directly beneath the slide release lever ledge and begin there are you wrap it completely around…
Need a more aggressive grip but not willing to sacrifice the factory stippling on your GST-9 MOD1? We've got just the thing for you! Introducing the Edge Minis from Handle It Grips! The Edge Minis are a custom design adhesive grip for the GST-9 MOD1. Users can install the grip directly beneath the slide release lever ledge so that when installed, your…
RUGGED & READY TACTICAL CLEANING KIT Big functionality in a small rugged package that easily fits into a pack or range bag. A chamber brush, carbon scraper, gas tube brush & mop help to clean more than the bore and keep your bolt cycling reliably. No annoying loose parts, every component is smartly organized and held securely in place. Rod…
RUGGED & READY TACTICAL CLEANING KIT Big functionality in a small rugged package that easily fits into a pack or range bag. A chamber brush, carbon picks and star chamber pads help to clean more than the bore and keep your bolt cycling smoothly. No annoying loose parts. Smartly organized, each brush, pick, jag, patch, pad and rod is held…
COMPACT & READY .22 – .45 CALIBER CLEANING KIT Big functionality in a small rugged package that easily fits into a pack or range bag. A complete cleaning kit designed to keep your handgun tip-top. No annoying loose parts. Smartly organized, each bore brush, jag, patch tip, rod and handle is held securely in place. This sets the standard for…
The Handgun Collection USB features the most popular and widely used 3D printable handguns available on DEFCAD. The following models are 3D printable and compatible with Riptide Rails Pistol Rails. Does not ship to NJ, WA, or internationally. USB includes the following: G19 DIY Rail G17 DIY Rail G19 P80 Rail G26 DIY Rail SD9 DIY Rail Support Creators directly or get…
This fine handgun features a 5.5″ barrel with a blue finish and is fitted with attractive one-piece cocobolo grips. The action features a frame mounted inertia firing pin and transfer bar for added protection. It is ideal for the exciting sport of Western Action Shooting, the Big Bore Rough Rider embodies the flavor of the Old West but will also…
This parts kit from KE Arms contains the all of the parts you will need to make your AR-15 stripped lower receiver functional for your custom AR15 or M4 build. Proudly made in the USA.
Machined Bolt Carrier Group Assembled with extractor and firing pin. Complete precision bolt assembly for the King Cobra 9. Ejector included. Made in the USA. Includes USB drive with files. Does not include: Barrel AR FCG AK Recoil Spring Magnets
KNS Push-Button Pivot/Takedown Pins for completing your Zero Percent Build. These pins have a spring-loaded push button that, when pushed, retracts the stainless steel detents for easy pin removal. The steel housing has a black oxide finish. The button also has a drilled cross hole which allows for the installation of a seal wire to prevent tampering with the guns…
The Legacy Collection USB features the most popular and widely used 3D printable guns available on DEFCAD. Does not ship to NJ, WA, or internationally. USB includes the following: Songbird Liberator Washbear Support Creators directly or get access to all the files at DEFCAD.com Does not ship to NJ, WA, or internationally. Please allow 2-3 weeks for delivery.
LEGIO is Defense Distributed's technical and legal support fraternity. Legionnaires do more than “protect” the Second Amendment. They fund its direct, material expansion. Legionnaires receive a membership card and exclusive legal and R&D updates. LEGIO membership is the only method for accessing the DEFCAD 3D file repository. Join us. Purchasing this product grants one year of LEGIO membership.
New Hi-Point Build Kit comes with the parts necessary to complete the CTRLPew’s Lo-Point 3D printed frame. All factory frame parts and original magazine are included, printed frame and tactical light pictured not included.
The Lug-Lok™ AR-15 Upper Receiver Vise Block by Real Avid uses the strength of the barrel lug to safely secure AR15 upper receivers. Allowing you to secure the lug-lok vise block in your bench vise at the angle best for the work you need to do and without the stress of deforming your upper when torque is applied. -
The LWRC International Compact Stock is a drop-in replacement for AR15/M16 carbines with mil-spec diameter buffer tubes. It is a lightweight, no-nonsense stock that features integral sling attachment points, one-handed adjustment, and an excellent cheekweld. The LWRCI Compact stock weighs in at only 7.9 oz.
Parts kit includes every single part necessary to build complete a Stealth Arms 80% 9mm 4.25″ Commander 1911. All parts are fully CNC machined. There are NO cast or injection molded parts. Does not ship to NJ, or internationally. ***Frame Not Included***
Mac11 (9mm) VMAC9 Side Cocking Upper w/tactical rail, 6 inch threaded barrel, side cocking handle, assembled bolt, and trunnion/barrel pin. Compatible with 3D printed builds. -
The Magazine Collection USB features the most popular and widely used 3D printable magazines available on DEFCAD. The following models are 3D printable and take oem or aftermarket springs. Does not ship to NJ, WA, or internationally. USB includes the following: Menendez Glock Mags Extendez Magazines Ivan’s DIY AR15 Magazine Support Creators directly or get access files at DEFCAD.com
Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter’s hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG helps mitigate recoil…
The MBUS Front Sight is adjustable for elevation, the Rear Sight is adjustable for windage. Compatible with 1913 Picatinny-railed hand guards, specifically on AR-15/M16 platforms.
The PMAG 10 GL9 is a Glock 9mm magazine that features a new proprietary all-polymer construction for great reliability and durability for over thousands of rounds. High visibility anti-tilt follower, stainless steel spring, easily removable floor plate for cleaning, paint pen dot matrix for mag marking. The ridged floor plate edges for better grip, and 10 round indicator windows. Drops…
If you are looking for a more accurate Glock, producing tighter groups at the range or in competition, then MatchPoint USA’s Glock Locking Block is a must try.
If you are looking for a more accurate Glock, producing tighter groups at the range or in competition, then MatchPoint USA’s Glock Locking Block is a must try.
If you are looking for a more accurate Glock, producing tighter groups at the range or in competition, then MatchPoint USA’s Glock Locking Block is a must try. Models: 26 (sub-compact)
If you are looking for a more accurate Glock, producing tighter groups at the range or in competition, then MatchPoint USA’s Glock Locking Block is a must try. Models: 43 (single stack)
An unbeatable value, the Foxtrot M-LOK 15″ Handguard by Matrix Arms is a quality hard coat anodized rail featuring a straight forward install process and quality hardware. This free floating, slim profile handguard has a continuous 1913 Picatinny rail. It is manufactured using 6061 T6 Aluminum and the high quality anodizing makes for a durable structure and quality, resilient finish.…
An unbeatable value, the Foxtrot M-LOK 15″ Handguard by Matrix Arms is a quality hard coat anodized rail featuring a straight forward install process and quality hardware. This free floating, slim profile handguard has a continuous 1913 Picatinny rail. It is manufactured using 6061 T6 Aluminum and the high quality anodizing makes for a durable structure and quality, resilient finish.…
The MagPul Back Up Sight (MBUS) Flip-Up Front Sight is a durable, inexpensive Back Up Iron Sight option specifically tailored for the AR-15 platform. Constructed of high impact polymer, the sights are lightweight, unobtrusive, and capable of withstanding harsh environments and rough handling in the field. The Flip-Up Front Sight is spring loaded, popping up instantly when activated by pressing…
Works better than the original plastic stock extruder, make loading filament much easier. Compatible with PLA/ABS/Wood/TPU/PTEG 40 Teeth drive gear feeds the 1.75mm filament very smoothly. Easy to Install. SPECIFICATIONS: Material: Aluminum Alloy Color: Gray Drive Gear: 40 Teeth
Compatible with Glock® 19 Gen 3 platform builds Matrix Arms’ *BRAND NEW* MX19 Slides are fully manufactured by us in their New Hampshire facility. Made out of Heat treated 416 stainless steel. Featuring RMR cut on the rear. These MX19 slides are manufactured with ONE thing in mind and that is QUALITY! Matrix Arms takes no shortcuts on these slides, they…
Brand: Surefeed Magazines Caliber: 223 Remington, 5.56mm NATO Capacity: 30-Round Material: Black Anodized Aluminum This product is not available for sale to states with high-capacity magazine restrictions.
Sometimes parts go missing or need replacement. Don’t be caught unprepared with a useless rifle and stand ready with the Double Star Oops! Kit. The kit fits easily in your range bag, backpack, and even in your pocket. Never say Oops! with the Double Star Replacement Kit.
Polymer80 brand Frame Parts Kit for Full Sized, Compact, and Subcompact 9mm Pistol Frames. Compatible with G17, G19, G34, and G26. No matter what size 9mm PF-Series frame the end user has, the Polymer80 Pistol Frame Parts Kit is perfectly suited for your next build.
$329.99Original price was: $329.99.$299.99Current price is: $299.99.
This kit includes everything you need to build your own Gen 3 G26 Frame design by: PY2A The PBS 26 is made possible by weapon builders like you. Available on backorder Ships to your doorstep 100% legal in free states Secure payment processing
lastikov Rail Kit – Stainless Steel, drop in ready. Compatible with Plastikov AK design by IvanTheTroll. Available to US persons except New Jersey residents. Does not ship internationally.
The PMAG 30 AK/AKM MOE is a durable, lightweight, high reliability 30-round polymer magazine designed for Kalashnikov pattern rifles (AK-47, AKM, AKS, and others) in 7.62×39 mm. It features a removable floorplate, constant curve geometry, and a high-reliability/low-friction follower for the performance you expect from a PMAG. Made in U.S.A.
The PMAG 35 EV9 is a lightweight, 35-round, 9x19mm CZ Scorpion EVO 3-compatible magazine. The PMAG 35 EV9 provides optimal round stack geometry, giving the large format pistol, PCC, and SMG market a pistol caliber magazine with Magpul reliability and increased magazine capacity at a competitive price point. Join the waitlist to be emailed when this product becomes available
The PMAG 10 GL9 – Glock 17 is compatible with all full-size 9mm Glock handguns and compact and sub-compact variants with some protrusion below the grip. Includes a high visibility controlled-tilt follower, a stainless steel spring, an easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 10-round indicator windows. The magazine…
The PMAG 10 GL9 is a 10-round Glock 9mm handgun magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. It includes a high visibility controlled-tilt follower, a stainless steel spring, an easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 10-round indicator windows. The…
Adding capacity and control with a minimal footprint, the PMAG 12 GL9 is a 12-round magazine for the Glock 26. Building on the proven PMAG 17 GL9 and PMAG 15 GL9, subcompact Glock users gain two more rounds of capacity while adding a built-in finger groove for a full grip. Featuring grasping grooves for easy retrieval and an easily removable…
The PMAG 15 GL9 is a 15-round Glock 9mm handgun magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. It includes a high visibility controlled-tilt follower, a stainless steel spring, an easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 15-round indicator windows. The…
The PMAG 17 GL9 is a 17-round Glock 9mm handgun magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Our Glock magazines come with many of our other platform PMAG features, including a high visibility controlled-tilt follower, a stainless steel spring, a floorplate that’s easily removable for cleaning, a paint pen dot matrix for magazine…
The Magpul PMAG 27 GL9 GLOCK Magazine is a 27-round magazine compatible with all double-stack GLOCK 9mm handguns. This 9mm magazine is built with a durable polymer body and stainless steel spring to ensure reliability and durability. For quick checks of the load status, this Glock PMAG features capacity indicator windows on both sides of the magazine body at 10,…
Similar to the MOE® PMAG, the GM2 features a long-life USGI-spec stainless steel spring for commonality, a four-way anti-tilt follower, constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning.
This also isn’t a normal small frame .308, it’s smaller! The Revolution features many 5.56 parts; such as charging handle, bolt carrier, cam pin, buffer, heat sink barrel nut, handguard, and 5-position gas piston operating system. The barrel extension, bolt assembly, upper, and lower receiver are the exact same size as those on an AR15
P80 SLIDE ASSEMBLY The Polymer80 PF-Series™ Complete 9mm Slide Assembly is comprised of a Black Nitride slide and barrel combination with Polymer80’s high quality slide parts, sights and recoil spring/guide rod assembly. The slide features aggressive front and rear serrations for a positive grip while manipulating the slide. The PF-Series™ Complete Slide Assembly is ready out of the box to…
The Eidolon is the culmination of over three years of design and development. It is designed to be the most refined and functional inside-the-waistband holster on the market. At the core of the Eidolon is the holster shell. The shell is precisely fitted to the weapon on the inside and is smooth on the outside to work in conjunction with…
As we continue to ship lowers in accordance with the ATF rule, we are faced with a backlog of 3-4 weeks due to high demand. Rest Assured, we are shipping all orders in the sequence that they are received in as fast as we can.
We pull out all the stops on these to ensure that you will have little to no processing to do on your end. Our goal is to provide you with a rear rail that will simply drop in and work. These are laser cut, tumbled, deburred, bent, bend-kinks removed, critical dimensions CNC machined (rail width, tab, and holes), and finally tumbled…
Rock Slide USA Pistol Upper – 9mm – Compatible With GEN-3 Glock 17/22/31 full sized frames. Also works with aftermarket frames such as the Polymer80 PF940V2 80% receivers.
Rock Slide USA Pistol Complete Upper 9mm Compatible With GEN-3/GEN-4 Glock 26 subcompact frames. Also works with aftermarket frames such as the Polymer80 PF940sc 80% receivers.
The Rook is the new age of firepower. Top engineers, designers, and operators came together to push this design into the modern age. Ergonomic, sleek, and downright sexy, The Rook is the true definition of Formal, Functional Firepower.
The Rook is the new age of firepower. Top engineers, designers, and operators came together to push this design into the modern age. Ergonomic, sleek, and downright sexy, The Rook is the true definition of Formal, Functional Firepower. Theaded barrel with thread cover.
Do you need a EDC handgun without breaking the bank? The Ruger Ec9s is small and a reliable striker-fire handgun. Perfect on the go and for every occasion. This neat little handgun is chambered in 9mm with a 7 round capacity. Save money and get yours today at GrabAGun!
Mark IV 22/45 is the classic semiauto target pistol design in 22 LR caliber with a 5 1/2′ barrel. This version features a 10 round magazine and adjustable front sights. Grab a Mark IV 22/45, some extra magazines and don’t forget to grab some ammo with fixed rate shipping. Happy shooting.
This kit contains all of the necessary parts to complete your 3D printed SG22 pistol. *As this product is under our 3D printing section, some part(s) must be 3D printed by the end user to complete this build* Does not ship to NJ, WA, or internationally.
Sig Sauer P320 9mm 21 Round extended Magazine. Made from durable steel with steel internal springs and features a special anti-friction coating. Engineered to meet strict military specifications for performance and reliability.
17-round magazine for the SIG SAUER P320 and P250 pistols chambered in 9mm with Sig Factory Coyote Tan baseplate. The baseplate matches the Sig Factory Coyote Tan X Series Carry and Full frame grip modules. Full and Carry size models only. Compatible with the G32 80% Insert.
The unique, FOXTROT1X mounts to any Picatinny 1913, SIG SAUER proprietary or Glock rails with no need for adapters or cross-slot modifications. Dual, finger actuated tact switches support ambidextrous use while functioning in either continuous or momentary mode. The ultra-efficient white LED runs for over 1.5 hours at 450 lumens on a single CR123 battery. The rail-mounted light is ideal…
Zaffiri Precision SLIDE BLANK for Glock 17 Gen 3. This single billet 17-4 stainless steel slide blank is made with tight tolerances that allow an increase in accuracy and performance. 100% American made and manufactured at our facility. Fully functioning cut with standard rear dovetail and front sight hole. -
Zaffiri Precision SLIDE BLANK for Glock 19 Gen 3. This single billet 17-4 stainless steel slide blank is made with tight tolerances that allow an increase in accuracy and performance. 100% American made and manufactured at our facility. Fully functioning cut with standard rear dovetail and front sight hole. -
Made from engineering-grade resin, the Real Avid Smart Bench Block is the perfect addition to your gun-cleaning kit. It won’t mar or damage the finish of your guns and an outside rubber liner keeps the block from sliding on any surface when driving in pins. An internal magnet grabs on to dropped pins to keep them from getting lost. Universal…
LOWER RECEIVER BLOCK THAT ADJUSTS FOR A ROCK SOLID FIT The Smart-Fit AR15 Vise Block is the last lower vise block you’ll ever need. The patent pending block expands to fit any .223 / 5.56mm AR15 magwell, making loose, sloppy fitting blocks a thing of the past. Insert the block into the magazine well and simply rotate the adjustment handle…
The Standard Issue was named after the new standards we’ve set in reliability and functionality. The slide alone was developed not only to compete with a basic Glock 19 slide, but to Surpass it. When you need more than the basic, defend yourself with something tested in the field extensively, The Standard Issue 19.
The Stealth Arms Phantom Jig. It has made it simple and easy to complete an 1911 80% Frame WITHOUT the need for a milling machine! Patent pending, the Phantom Jig will have everything needed to bring your 1911 80% Frame to completion and ready to accept parts.
The Sylvan Arms 9mm Glock Conversion Block is a drop-in fit to give you a 9mm capable lower without resorting to buying a pistol caliber specific option. Designed to install in Mil-Spec lowers almost exactly like a standard rifle magazine.
As we continue to ship lowers in accordance with the ATF rule, we are faced with a backlog of 3-4 weeks due to high demand. Rest Assured, we are shipping all orders in the sequence that they are received in as fast as we can.
This USB contains the following files: FMDA DD26.2 (compatible with Aves DD26.2 Rails) Shield 9 ASP DD19.2 (compatible with Aves DD19.2 Rails) DD17.2 (compatible with Aves DD17.2 Rails) FDMA G43 SS80
US Palm AK Pistol Grip, FDE. Formed of resilient flat dark earth polymer, this US P.A.L.M. pistol grip is designed for the AK platform like the AK-47, AK-74 & AKM as well as similar rifles which include the RPK, Tabuk and Serbian M70, M64, M21 & M72 models. The grip carries a design meant to drive the shooter’s hand up…
Introducing AWCY’s Scorpion EVO, a hybrid 3D printed firearm that utilizes an OEM bolt, barrel, standard screws & springs, a printed receiver, and printed furniture.
The FGC-9 is a 9x19mm pistol caliber carbine that is made mostly out of 3D-printed components, utilizes an AR-15 or airsoft M4 rifle fire control group, is compatible with Glock magazines and offers a truly effective, simple to build, and reliable tactical option for self-defense and more.
USB drive containing the latest software for the Ghost Gunner 1 and Ghost Gunner 2. Not compatible with Ghost Gunner 3. Includes cutting codes for completing 80% lowers/frames for the following platforms: AR-15 AR-308 M1911 Polymer80 (PF940C)
USB drive containing the latest software for the Ghost Gunner 3. Please note that this item ships with Ghost Gunner 3 orders by default to US customers. Not compatible with GG1 and GG2. Includes cutting codes for completing 80% lowers/frames for the following platforms: AR-15 AR-308 M1911 Polymer80 (PF940C) AK-47 AR-00 Also includes the latest version of DDCut, and Grbl…
USB with files for the King Cobra 9 Megapack – Deleted-Blowback 9mm Firearm Platform The King Cobra 9 is a 9mm pistol-caliber carbine built with a minimum of firearms components, utilizing a custom bolt design and a radically new approach to recoil management in homemade firearms: the deleted-blowback system. This system, developed and fine-tuned over a two year development cycle,…
These newly designed WBP Polish synthetic 7.62×39 30rd magazines are a great option for a light weight reliable mag. Throw them from extreme heights or run them over repetitively with a 2 1/2 ton Deuce on concrete and they are still in the fight. Using an advanced polycarbonate blend along with a high strength heat treated steel spring these are…
This buffer tower is sold without the lower lower and is intended to be used with 3D printed lower lowers. (Files can be found on the USB drive you received with your Zero Percent Starter Kit)
6061 billet aluminum AR-15 Buffer Tower block. This is for use with the Zero Percent Starter Kit on the Ghost Gunner 3, and results in a completed “Buffer Tower” for the AR-15 Zero Percent platform. *Please allow up to 12-16 weeks for delivery
